Another BSOD

Joined
Jul 30, 2011
Messages
18
Reaction score
0
Haha, I lost track of where i left off with the other minidumps, so I started from August 1st. There were 2 cases I think where there was just a reboot and no BSOD

And sure, I'll give it a shot with the pictures, gimme a few
 

Attachments

Joined
Jul 30, 2011
Messages
18
Reaction score
0
Funny enough I got a blue screen posting this. Anyway, here they are - I'm assuming the first set is stick 1, and second is stick 2. The first picture is where I'm getting into the menu, the next two are the top of the page and the bottom. Sorry for the weird pictures, I only had the phone on my camera around
 

Attachments

Joined
Jul 30, 2011
Messages
18
Reaction score
0
And I got this error with winamp, wondering if it's related. I haven't gotten it before:
 

Attachments

Joined
Jul 22, 2011
Messages
37
Reaction score
9
Yes I do

Can you set tcl, trcd and trp to 9 and Tras to 25 and Trc to 40 with a ddr voltage of 1.65V. See if that helps
 
Joined
Jul 30, 2011
Messages
18
Reaction score
0
All right, I have those settings set. Nothing strange so far.

The only thing I haven't touched is the ddr voltage - is this DRAM frequency or another setting?

Should I change the Command Rate to T2 as well, or is it fine on auto?
 
Joined
Jul 22, 2011
Messages
37
Reaction score
9
The command rate on auto should be fine. To test for stability get a util called occt ad let it run for a couple of hours.
 
Joined
Jul 30, 2011
Messages
18
Reaction score
0
Sigh...

All was good. No problems. Then today I got a flurry of crashes, and in all cases no crash dumps were made. Two of the times it went into the blue screen, but the first time it froze and the second time it just abruptly ended. This has me very worried now, hahaha

Edit: Apparently the last crash dump made was on 8/7, which seems odd
 

zigzag3143

Wanikiya
Microsoft MVP
Joined
Sep 22, 2010
Messages
268
Reaction score
110
After doing what NemesisUK suggests you might also want to update a few of the older drivers

Code:
wacommousefilter.sys    2/16/2007 2:12:17 PM        fffff880`04067000    fffff880`0406f000    0x00008000    0x45d5f401                        
[B][COLOR=Red]VMNetSrv.sys    1/16/2008 [/COLOR][/B]7:52:01 AM        fffff880`02ad8000    fffff880`02aed000    0x00015000    0x478defe1                        
hamachi.sys    2/19/2009 6:36:41 AM        fffff880`04169000    fffff880`04174000    0x0000b000    0x499d3639                        
[COLOR=Red][B]vmm.sys    4/7/2009 [/B][/COLOR]9:25:54 AM        fffff880`03cb2000    fffff880`03cff000    0x0004d000    0x49db5462                        
GEARAspiWDM.sys    5/18/2009 8:17:04 AM        fffff880`0466a000    fffff880`04677000    0x0000d000    0x4a1151c0                        
amdxata.sys    5/19/2009 1:56:59 PM        fffff880`00d8d000    fffff880`00d98000    0x0000b000    0x4a12f2eb                        
[COLOR=Red][B]netr28ux.sys    5/25/2009[/B][/COLOR] 12:38:17 AM        fffff880`06302000    fffff880`063f6000    0x000f4000    0x4a1a20b9
How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference http://www.carrona.org/dvrref.html
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html


THEN run the update readiness tool and then update to SP-1



Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [May 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

ISC Diary | Windows 7 / 2008 R2 Service Pack 1 Problems

links courtesy jmh
 
Last edited:
Joined
Jul 30, 2011
Messages
18
Reaction score
0
Thanks for the additional reply.

What's bothering me is that I addressed some of the drivers reported as outdated, and at one point even used a driver cleaner.. hm. VMNetSrv.sys and vmm.sys are associated with Windows Virtual Machine, which I haven't used in a while. Could these still cause conflict? I don't believe I found any updates either; at least, not on the Window's site as far as I know. but it's possible I missed something obvious
And this:

netr28ux.sys
Ralink RT2870 series USB802.11n Wireless Adapter Driver (you may have a different manufacturer)

I use a Linksys usb adapter, and I installed the driver update. Should I just download the Ralink driver? After some clarification I'll do the readiness tool
 

Elmer BeFuddled

Resident eejit
Joined
Jun 12, 2010
Messages
1,048
Reaction score
251
I'd try the Linksys (Cisco) site first. They seem to offer good support, but without your model number I got lost! Cisco
 
Joined
Jul 30, 2011
Messages
18
Reaction score
0
http://homesupport.cisco.com/en-us/wireless/lbc/WUSB100

Mine is older, however :(

I updated those drivers a while ago, though.sigh.. hm. So I've been wondering if this could be a problem with my GPU. Occasionally (not even with particularly intensive apps, quite mild usually) I'll get a few dotted green lines in a spot. Could this be overheating?

Edit: But then Firefox has been crashing often.. and sometimes I'm getting "Windows module xyz has stopped working." I even had a hiccup with the video card once I think, where it cause a freeze but then recovered
 
Joined
Jul 30, 2011
Messages
18
Reaction score
0
Hmm.. I guess it's a lost cause at this point huh? BSODs back to their usual behaviour unfortunately. I could post minidumps but it feels hopeless at this point :p
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top