New system won't boot. Suspected HDD problem.

[Chriso]

Hey there,
I am a new member here and was just seeking some help.
I recently had a new PC built (yes, built for me) and after about an hour of use I turned it off.
After turning back on, it goes through the boot process, then starts loading '2.2TB infinity' once loaded it gives me an option of booting from CD/DVD drive but my 2TB hdd is not listed? So I am unable to use this pc. Any help would be appreciated

System specs are as follows.
Intel i7 960
4 x 4GB DDR3 RAM
ATI Radeon HD 5450
MSI X58A-GD45
GW Falcon case
Seagate 2TB HDD
ASUS 23.6" LED Monitor
Win7 Home Premium 64bit

 

[Nibiru2012]

Go into your BIOS and see if the hard drive is being recognized there. If it is, then there is something else wrong.

You have an awfully large hard drive for a boot/system drive. Did the builder give you the motherboard user manual when you picked up the system?

 

[Chriso]

Thanks for the reply.
Yes, it is big, but was partitioned into 400GB / 1.4TB parts.
And in BIOS it is recognized but the status of the drive is 'unconfigured'
I noticed it was like this when it was first working however.
Thanks

 

[Chriso]

And yes, I do have the motherboard manual