LG monitor driver problems

[Geokin]

Ok so i have w7 working fine on my comp i got the sound all working and everything, all but one thing is working fine and that is my LG Flatron W2252TQ screen, i had to basically force windows to acknowledge my driver for the screen, but i still cant get it to work any suggestions ?????

 

[Ian]

Your monitor shouldn't need any specific monitors for it to work, so when you say that you can't get it working, what do you mean? Does it not list the proper resolutions that your monitor can handle?

 

[olg207]

Hello, by the way nice monitor.
Can you expand on your problem, e.g. black screen.
I would suggest you will need to re-install your graphics card drivers - but you should still be getting a signal?
I recommend you try re-installing these drivers, get updates from Microsoft directly, by using the update program in the control panel.
If you cant do this, please reply and give us some more info - Thanks.

 

[Geokin]

yes Ian you are right i still get a signal but it does not send the right input to the monitor for the higher rez (1600's) and i know it can handle them caus when i was running xp it recognized the drivers nicely and all worked fine.

 

[Ian]

So you are able to select the correct resolution, but the refresh rate is incorrect and you get an "out or range" or similar error on your monitor? The more information you can give us about the problem, the more we can help

 

[Geokin]

Right again ian, when i select the rez and press ok it goes black and says something like "76.5Kh/60HZ out of range"

 

[Ian]

You can add custom refresh rates to see if that works, but first of all, did you use the latest driver from the LG site?

Click the "drivers & software" tab and then download the zip:

http://www.lge.com/us/support/product/support-product-profile.jsp?customerModelCode=W2252TQ-TF&initialTab=documents&targetPage=support-product-profile#

 

[Geokin]

The driver version is the same 1.0.0.0, unfortunately this model has been discontinued so im doubting and updates to the drivers ill try all the refresh rates and see if that helps...... ok so i tried that and it still says out of range

 

[thedrunk]

The driver version is the same 1.0.0.0, unfortunately this model has been discontinued so im doubting and updates to the drivers ill try all the refresh rates and see if that helps...... ok so i tried that and it still says out of range

what vid card you got and do you have the catylist/Nview software for it?


I have had same problem with a flatron when first installing I had to dual monitor and custimize the refreash rate using the controll center in Nview.............. 59Mhz

monitor: 20" lg flatron l1932tq

 

[rheymund]

SOLVED!!! See my post here.
https://www.w7forums.com/lg-flatron-w2252tq-driver-download-solved-t12615.html#post103547