Driver for Epson Lx 300

[sgp954]

I have windows 7 installed on laptop but I cannot connect my epson Lx300 printer.
1. is there any solution?
2. is driver for Lx 300 available for windows 7

 

[clifford_cooley]

LX-300 Impact Printer

Good news, there is 32-bit and 64-bit support.
Windows 7 Compatibility Center - Epson LX-300 Printer

Steps:

• Open "Devices and Printers"
• Click "Add a printer"
• Select "Add a local printer"
• Then "Choose a printer port"
• The Epson LX 300 will not be listed until after you click "Windows Update" to find more printers.
• Now you can browse and select your printer.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
It is also important to mention that if you are installing from a shared network printer and the printer will not install, install the printer as if it is directly connected first. This ensures that the drivers are installed and will then allow you to install the shared network printer.

Good luck, I hope this helps you install your printer.

 

[sgp954]

LX-300 Impact Printer

LX-300 Impact Printer
Good news, there is 32-bit and 64-bit support.
Windows 7 Compatibility Center - Epson LX-300 Printer





Steps:

• Open "Devices and Printers"
• Click "Add a printer"
• Select "Add a local printer"
• Then "Choose a printer port"
• The Epson LX 300 will not be listed until after you click "Windows Update" to find more printers.
• Now you can browse and select your printer.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
It is also important to mention that if you are installing from a shared network printer and the printer will not install, install the printer as if it is directly connected first. This ensures that the drivers are installed and will then allow you to install the shared network printer.

Good luck, I hope this helps you install your printer.

Thanks!
I tried this method, Got following message "WINDOWS UNABLE TO LOAD LIST OF PRINTERS" Pl. suggest other method

 

[TrainableMan]

Chose "EPSON LX Series 1 (80)". See THIS thread.