- Joined
- Jul 15, 2019
- Messages
- 2
- Reaction score
- 0
Product: HP Pavilion M6 Notebook 1045
Operating System: Microsoft Windows 7 (64-Bit)
I updated from Windows 7 to Windows 10. After doing this my laptop would keep restarting. I tried fixing it, no luck. So I went back to Windows 7. The same problem continued except now I keep gettin the blue screen every time. I says ....
Attempt to reset Display Driver and Recover from Timeout Failed. Check New hardware and software installed properly. If new installation ask manufacturer for updates.
Technical Information
STOP: 0x00000116 (0xFFFFFA800A11074EO, 0xFFFFF8800F2737BO,0xFFFFFFFFC0000001)
Then it happened again and gave a different message.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x00000D1
So I attempted to unistall the Display Driver in Device Manager and recieved the following messages...
HPOSD.exe Application Error
The instruction at 0x000065ad0 teferenced memory at 0x00000000. The memory could not be read.
Task.exe- Application Error
The exception Breakpoint
A breakpoint has been reached. (0x8000003) occurred in the application located at 0xfd7399e2.
HPOSD.exe Application Error
The instruction at 0x010c5445 regerenced memory at 0x00000000. The memory could not be read.
Explorer.exe Application Error
The instruction at 0x800001ba5 referenced memory at 0x00000000 could not be read.
Then another blue screen popped up and and it said.
DRIVER_POWER_STATE_FAILURE
Technical Information
0x0000009F
Can someone please help me with this. Ive been trying to resolve this for 3 weeks now. See my minidump reports and system information in the link below.
https://1drv.ms/u/s!AnOzVwlnPLCOo2nWGOkGGNmRSZbY?e=rOvwIQ
Operating System: Microsoft Windows 7 (64-Bit)
I updated from Windows 7 to Windows 10. After doing this my laptop would keep restarting. I tried fixing it, no luck. So I went back to Windows 7. The same problem continued except now I keep gettin the blue screen every time. I says ....
Attempt to reset Display Driver and Recover from Timeout Failed. Check New hardware and software installed properly. If new installation ask manufacturer for updates.
Technical Information
STOP: 0x00000116 (0xFFFFFA800A11074EO, 0xFFFFF8800F2737BO,0xFFFFFFFFC0000001)
Then it happened again and gave a different message.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x00000D1
So I attempted to unistall the Display Driver in Device Manager and recieved the following messages...
HPOSD.exe Application Error
The instruction at 0x000065ad0 teferenced memory at 0x00000000. The memory could not be read.
Task.exe- Application Error
The exception Breakpoint
A breakpoint has been reached. (0x8000003) occurred in the application located at 0xfd7399e2.
HPOSD.exe Application Error
The instruction at 0x010c5445 regerenced memory at 0x00000000. The memory could not be read.
Explorer.exe Application Error
The instruction at 0x800001ba5 referenced memory at 0x00000000 could not be read.
Then another blue screen popped up and and it said.
DRIVER_POWER_STATE_FAILURE
Technical Information
0x0000009F
Can someone please help me with this. Ive been trying to resolve this for 3 weeks now. See my minidump reports and system information in the link below.
https://1drv.ms/u/s!AnOzVwlnPLCOo2nWGOkGGNmRSZbY?e=rOvwIQ